• M0870 Micropitch Flat Top 0.3

  • Description • 0% open area • Solid plate • Imperial belt width • Dynamic open hinge, easy to clean • Rod diameter 3 mm (0.12") • Nosebar diameter 6 mm (0.236") • Snap Fit rod retaining system • Food approved materials available Standard belt widths in increments 6.0" (152,4 mm). Non-standard widths are offered in increments of 2.0" (50.8 mm). Please check the correct sprocket position with your local contact. Smallest possible width 4.0" (101.6 mm). For detailed material properties refer to pages 282 - 289. The nominal tensile strength is valid for 23 °C (73 °F). The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength. For detailed information and correct calculation of effective tensile force refer to the Calculation Guide in the HabasitLINK® Engineering Guidelines.
  • Liên hệ
  • Ứng dụng
  • Tính năng
  • Đánh giá

+ Lĩnh vực thủy hải sản

+ Sản xuất bánh kẹo

+ Chế biến nông sản 

 

 

+ Dễ dàng vệ sinh

Dễ dàng tháo lắp

+ Chịu mài mòn và tuổi thọ cao

 

Copyright © 2019 SAO PHƯƠNG NAM. Thiết kế web Nina
Online: 4 | Truy cập tuần: 500 | Tổng truy cập: 36436